Automatic Standby; Recorded Visitor Tab - Extel STEP ACCESS Guide D'installation Et D'utilisation

Missed calls
A call from the outside station triggers an audible alarm and switches on the monitor. You have up to 30 seconds
to answer the call. If you have not answered within 30 seconds, a missed call message is left on the monitor if the
function has been activated.
• You can choose to take pictures if there is a missed call (see "settings tab" part). In this case a certain number of
pictures are taken corresponding to the number of pictures you selected. These photos are stored in the internal
memory if no SD card has been inserted. Otherwise they are stored on the SD card.
• You can also choose to record video if there is a missed call (see "settings tab" part). In this case a video is
recorded (10, 20 or 30 seconds depending on the selected setting). Warning: Videos will be recorded only on
your SD card.
• If there is a missed call message. A green band with an envelope is displayed on the home page. The number
beside the envelope indicates how many missed calls there are. Furthermore, the blue LED located under the
screen flashes as a visual indicator if the screen is on standby.
Press the green band to access the messages (photos or videos). Once all the files have been viewed, the missed
call message disappears and the blue LED stops flashing.
Putting the screen on standby
Putting the screen on standby consists in it "going to sleep" to save energy and extend the screen's service life. It
can be done manually or automatically. In the event of a call from the outside, the screen wakes up automatically
and switches directly to the videophone window, and therefore to the images of the visitor.
Manual standby
Press the button on the top right of the monitor (6 fig.6) to put the screen on standby. Press again or brush the
screen to wake it up .

Automatic standby

The "energy saving" function is always active in order to avoid consuming electricity on this system fitted with
event memory
• If the screen is on the settings page or the multimedia page for more than 35 seconds, it automatically switches
back to the home page
• If the screen is on the home page, it automatically switches to standby mode after 10 seconds
• You just need to brush the screen to exit standby mode, or press the button at the top right of the monitor.
d. Recorded visitor tab
1. Current tab (Symbol, no action)
2. Access pictures (blue icon = directory selected)
3. Access videos (icon greyed out = directory not selected)
4. Directory of files recorded automatically during missed calls
5. Directory of files recorded manually during monitoring AND files imported using the SD card
CFI EXTEL STEP - STEP ACCESS - 03/2017
GB8