Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
18
6.2
CRySTAL EmBER PLACEmENT
TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED
EN
SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE.
1. Unscrew the two screws at the bottom of the front plate.
2. Unhook and lift off the frame of the inner surface and
place carefully on a safe work surface.
3. Unscrew the two screws on the ember tray with a screw-
driver.
4. Remove the logset and put the crystals in.
5. Re-install the frame of the inner surface.
W415- 2166 / A / 06.29.16
WARNING
!
UNHOOK INNER FRAME
FRONT PLATE
Front View of Appliance
2 Screws
UNSCREW LOGSET
2 Screws
PLACE CRYSTALS
PLACE CRYSTALS
Publicité
Chapitres
Table des Matières
Dépannage
