3.2
front glass removal
FOR WALL-MOUNT, PARTIAL-RECESS AND MANTEL-INSTALLED APPLIANCES ONLY:
A.
Remove the 2 screws from the top of the appliance (Fig. 1).
B.
Have 2 people lift the glass up and away from the appliance, holding the glass vertical - not fl at - while
carrying. Place the glass face down onto a soft, non-abrasive surface, being careful not to fl ex the glass.
C.
Install the crystal embers (see "crystal ember installation" section). Install the front glass by aligning with
the pins on the appliance. This ensures the touch display panel performs properly.
3.3
crystal ember installation
The glass front must be removed and the appliance must be secured in its fi nal location before the crystal embers
are installed.
A.
Carefully place crystal embers into the bottom media tray on the
front of the appliance.
B.
Apply an even layer from side to side.
Fig. 3
fi nishing
EN
Fig. 1
17
W415-1699 / E / 06.01.20