Pelgrim OSWA0980 Serie Notice D'utilisation page 57

OPERATION
cleaning indicator must be activated.
1. Switch off the cooker hood and the lighting.
2. Press and hold the '-' button for four seconds.
▷ You will hear a long beep and on the LED status bar the
indications of level 1, 2, 3, P and the filter saturation will come
on for five seconds as confirmation.
Switching off the carbon filter cleaning indicator:
1. Switch off the cooker hood and the lighting.
2. Press and hold the '-' button for four seconds.
▷ You will hear a long beep twice and on the LED status bar the
indications of level 1 and 2 and the filter saturation will come on
for five seconds as confirmation.
Battery replacement
1. Remove the two screws from the remote control backside.
2. Replace the battery (type "23A").
▷ The battery is chemical waste and should be transported in a
responsible way in accordance with government regulations.
EN 9