Dremel Micro 8050 Consignes De Sécurité/D'utilisation page 23

DM 2610031565 05-14-v8_8050 5/13/14 11:45 AM Page 23
Grinding Wheel
Use for deburring, removing rust, and general
purpose grinding. Use with Mandrel #402.
Cutting Wheels
These thin discs of emery or fiberglass are
used for slicing, cutting off and similar
operations. Use them for cutting off frozen bolt
heads and nuts, or to reslot a screw head
which has become so damaged that the
screwdriver won't work in it. Fine for cutting
BX cable, small rods, tubing, cable and cutting
rectangular holes in sheet metal.
Drywall Cutting Bit
Gives you fast, clean cuts in drywall. Use with
Dremel No 565/566 Cutting Guide attachment.
Tile Cutting Bit
Cuts ceramic wall tile, cement board, and
plaster. Use with Dremel No 565/566 Cutting
Guide attachment.
Spiral Cutting Bit
Cuts through all types of wood and wood
composites. Use with Dremel No 565/566
Cutting Guide attachment.
High Speed Router Bits
For routing, inlaying, and mortising in wood
and other soft materials. Use with Dremel No.
335 Router attachment and No. 231
Shaper/Router table.
Dremel Accessories (Cont.)
Titanium coated brad points stay on center
and begin drilling immediately. For use on
wood. Size 1/8", 5/32", 3/16", ¼" . 1/8" shank.
HSS drill bit for use in metal and plastic. Size
1/8", 7/64", 3/32", 5/64", 1/16", 3/64", 1/32".
Shank size matches the drill bit size. Different
collet size (481, 482, 483) or Dremel chuck
(4486) required according to drill bit being
used.
Diamond tipped drill bits for use on glass and
ceramic wall tile. Lubricant included.
Blows dust away for greater visibility to work
piece. Great for sanding, engraving and
carving. Do not use dust blower to stop or
slow down the tool. Do not contact dust blower
with fingers or workpiece during use.
This chuck allows you to quickly and easily
change accessories on Dremel Rotary Tools
without changing collets. Accepts accessories
with 1/32" - 1/8" shank. Read instruction
manual. Insert and securely tighten the shank
of the accessory well within the jaws of the
chuck.
23
Brad Point Drill Bits
HSS Drill Bits
Glass Drill Bits
Collet Fan
Dremel Chuck