Festo Soft Stop SPC11 Serie Guide De Référence Rapide page 20

3.1 Summary of fitting and pneumatic installation
(example DGPL-... and MLO-POT-...-TLF)
1
Measuring system
2
Fixed stops
3
Measuring system
connection
4
Proportional direc-
tional control valve
5
Service unit (with-
out lubricator, with
5 µm filter)
Special instructions on the components used can be found
in the manuals for the SPC11.
Connections to the proportional directional control valve
Work connection 4 causes movement in the direction of
the zero point of the measuring system. Work connection 2
causes movement in the opposite direction. With linear
drives, the zero point of the measuring system lies on the
side with the measuring system connection.
20
1 2 3
P.02 P.01
4 2
1
5 4
Festo SPC11-... 0012NH English