Festo Soft Stop SPC11 Serie Guide De Référence Rapide page 19

Specially for measuring systems type MLO-POT-...-TLF):
S
Mount the measuring system so that it is electrically
insulated.
S
If the measuring system is to be used in a dusty or
dirty environment, mount it so that the actuator slide
faces downwards.
Specially for measuring systems type MLO-POT-...-LWG:
S
In order to earth the system, connect the earth/ground
cable on the flat plug of the measuring system to the
earth connection on the SPC11.
Fixed stops
S
Limit working stroke with fixed stops. With drives of
type DGP(I)(L)-..., the working stroke should not pro-
ject into the range of the end position cushioning
(PPV).
Mass load
S
Fasten the permitted mass load to the slide without
play.
Festo SPC11-... 0012NH English 19