Comfort Idro Front Pellet Feeding Optional Kit - Extraflame COMFORT MAXI 001270303 Manuel

COMFORT IDRO FRONT PELLET FEEDING OPTIONAL KIT

The use of this optional kit allows to feed the pellets into the feed-box from the front without extracting
the ue, therefore without switching it o .
First, remove the front, upper frame by unhooking it from the 2 lateral frames: to do this, lift it by about 10
mm and then pull it towards yourself. The frame must be picked-up using protection for the hands as it
could have overheated during functioning.
Take the re irons supplied, attach them to the 2 holes in the lower part of the cast iron grate and pull to
maximum extension.
Take the supplied Allen wrench, insert it into the
relevant seat and turn in a clockwise direction until
fully home. If this operation has been carried out
correctly the drawer will be blocked and cannot be
moved forwards or backwards.
At this point, take the internal drawer and pull it
towards yourself to maximum opening: perform
ALLEN
WRENCH
FRONT UPPER FRAME
IN CAST
FIRE IRONS
INSERT A
ALLEN
WRENCH
GRATE
IRON
25