Maintenance And Cleaning - Black & Decker BDH1800SM Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Empty the water tank.
• Remove accessories and cleaning pads. Wash them so they are ready for the next use.
(Take care to follow the wash care instructions printed on the cleaning pad).
Your Black & Decker corded appliance has been designed to operate over a long period
of time with a minimum of maintenance. Continuous satisfactory operation depends upon
proper appliance care and regular cleaning.
WARNINg:
switch off and unplug the appliance.
• Clean your appliance using a soft damp cloth. Never let any liquid get inside the
appliance; never immerse any part of the appliance into a liquid. IMPORTANT: To
assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment
should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
• For stubborn marks you can use a mild solution of soap and water to dampen your cloth.
Recommended accessories for use with your appliance are available from your local dealer
or authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
WARNINg:
appliance could be hazardous.
PROBLeM
• Unit will not start.
• Will not make steam.
• Leaves water on floor.
• Left spot on floor.

MAINTeNANCe AND CLeANINg

Before performing any maintenance or cleaning on corded appliances
ACCeSSORIeS
The use of any accessory not recommended for use with this
TROUBLeShOOTINg
POSSIBLe CAUSe
• Cord not plugged in.
• Main switch not on.
• Circuit fuse is blown.
• Circuit breaker is tripped. • Reset circuit breaker. (If the
• Cord or switch is
damaged.
• No water in water tank.
• Cleaning pad is too wet. • Unplug unit from power outlet
• Left in one spot too
long.
POSSIBLe SOLUTION
• Plug appliance into a working outlet.
• Turn main switch on.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a Black & Decker
service center or authorized
servicer.)
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a Black &
Decker service center or
authorized servicer.)
• Have cord or switch replaced
at a Black & Decker Service
Center or Authorized Servicer.
• Add water to the water tank.
and change the micro-fiber
cleaning pad.
• Never leave the steam cleaner on
the floor with a damp or wet
7

Publicité

Table des Matières
loading

Table des Matières