Samsung DVD-L100 Mode D'emploi page 86

Connecting to a Stereo Component
Playing Dolby Digital (5.1-CH) and DTS Audio
• You can enjoy full and dynamic surround sound by connecting a Dolby Digital/DTS
digital surround processor or amplifier equipped with a Dolby Digital/DTS surround decoder
to the optical digital jack on the DVD player.
• When using DTS digital surround, select the DTS audio by using the disc menu screen
or function adjustment screen.
After making the connections shown above;
1. Set the "Digital Output" to "Bitstream" (see page 54) in "AUDIO SETUP".
Caution
• To play a DTS disc, you need a DTS processor or amplifier.
• If the DTS processor or amplifer you want to use does not have an optical digital input jack,
digital connection is not possible.
• Refer to owner's manual of the processor or amplifier for details on connections.
DIGITAL OUT
Optical Digital Cable
(Sold Separately)
Dolby Digital (5.1-Channel)/DTS
processor or amplifier
Connect to an Optical Digital Input Jack
DIGITAL
COXIAL OPTICAL
ENGLISH
21