Setting Up The Audio Options - Samsung DVD-L100 Mode D'emploi

ENGLISH

Setting Up the Audio Options

1. With the unit in Stop mode, press the SETUP button.
2. Use the UP/DOWN buttons to select Audio. Then press the ENTER button.
3. Use the UP/DOWN buttons to select the desired item. Then press the LEFT/RIGHT buttons.
Digital Output
1. PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the
Digital Audio Output.
NO NO TE: Be sure to select the correct Digital Output or no audio will be heard. TE:
DTS
1. Off : Digital signal is not output.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Dynamic Comp.(Compression)
1. On : To select dynamic compression.
2. Off : To select the standard range.
2x Scan Audio
1. Off : Turns 2X audio off. Though 2X Scan Audio is ON in the SETUP MENU, no sound will be heard
on discs which are recorded with LPCM, DTS or MPEG-2 Audio.
2. On : Turns 2X audio on.
NO NO TE: TE:
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
• "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
54
Instruction Use UP/DOWN to navigate the Iist
Press LEFT/RIGHT to change the Setting