Using The Battery Pack; Charging The Battery Pack - Samsung DVD-L100 Mode D'emploi

ENGLISH

Using the battery pack

Important!
• When inserting the battery pack, make sure that it is inserted correctly.
Otherwise, your DVD player may malfunction.

Charging the battery pack

Use the AC adapter (included) to charge the battery pack.
• Before charging, make sure that the battery pack is correctly seated.
1. Connect the AC cord to the jack on the AC adapter ( ).
2. Plug the other end of the AC cord into an AC outlet ( ).
3. Connect the DC cord to the DC IN jack on the left side of the DVD player ( ).
Blinking time
Once per second
Twice per second
Three times per second
Blinking stops and stays on
On for a second and
off for a second
Power Charge Lamp
-Green light will flash while charging.
-When the battery pack is charged, the light will stop blinking and remains green.
24
1
Charging rate
Less than 50%
50%~75%
75%~90%
90%~100%
Error-Reset the battery pack and
the DC cable
2
3
3
1
2