Samsung DVD-L100 Mode D'emploi page 85

ENGLISH
Connecting to a Stereo Component
Digital Connection
Digital Output (optical)
After the completion of above connections;
1. Set the "Digital Output" to "PCM" (see page 54) in "AUDIO SETUP".
Digital connection to audio component or MD player without Dolby Digital decoder
• Audio CD or Video CD
Play the disc, with the audio mode set to "Left" or "Right". When connecting digitally,
DTS-encoded audio tracks will produce distorted sound.
• DVD Disc
When playing a Linear PCM Audio encoded disc, you must use the digital connection
method shown above.
CD recording using digital connection to a MD
When digitally connecting to an MD to record the content of a CD, track numbers on the MD
and the CD may not match.
NO TE:
NO TE:
Only use an optical Digital Cable which has been designed for use with portable DVD.
20
Optical Digital Cable
DIGITAL OUT
Audio component equipped with
optical digital input jack
Connect to optical digital input jack
DIGITAL
COXIAL OPTICAL