Napoleon PTSS165 Mode D'emploi page 11

Problem
"Paint" appears to be peeling
inside lid or hood.
Burner output on "high"
setting is too low. (Rumbling
noise and fluttering blue
flame at burner surface.)
Possible Causes
Grease build-up on inside
surfaces.
Lack of gas.
Supply hose is pinched.
Dirty or clogged orifice.
Spider webs or other matter in
venturi tube.
Solution
This is not a defect. The lid and hood are
stainless steel, and will not peel. The
peeling is caused by hardened grease,
which dries into paint-like shards that flake
off. Regular cleaning will prevent this. See
cleaning instructions.
Check gas level in propane cylinder.
Reposition supply hose as necessary.
Clean burner orifice.
Clean out venturi tube.
www.napoleongrills.com
11