Accessories - STEINEL PROFESSIONAL IS 3360 KNX Mode D'emploi

• Insert fastening screws and mount load module.
• Fit sensor and load module together and screw into place.
• Set functions. (
"6� Funtion")
• Fit designer trim.
6� Function
You will find an application description at knx�steinel�de
Functions to be used are selected from the "General Settings" parameter window
using the Engineering Tool Software (ETS) from version ETS4.0.
1. Issue physical address and generate application program in the ETS.
2. Load the physical address and application program into the motion detector.
When you are prompted, press programming button
3. The red LED goes out once programming has been successfully completed.
Functions, RC6
– Service mode
– Reach, sensor sensitivity HF
– Light level, brightness setting, teach-in
– Lighting control stay-ON time
– HVAC switch-ON delay, room surveillance, HVAC stay-ON time
– Basic lighting stay-ON time, brightness setting, teach-in
– Presence- and lighting test mode
Functions, RC7
– Dimming function
– Light ON/OFF 4 h
– Saving, activating scene
– Reset
Smart Remote
– Replaces remote controls RC6 and RC7
– Control via smartphone or tablet
– Load appropriate app and connect via Bluetooth
Additional functions, Smart Remote
– Programme mode
.
26
LED function
– Programming mode: LED ON
– Normal mode: LED stays OFF
– Test mode: LED lights up on detecting movement
– Remote control: LED flashes approx. 10 times per second
Detailed descriptions are provided in the operating instructions for the particular
remote control.
7� Accessories
– User remote control RC6 EAN 4007841 593018
– Service remote control RC7 EAN 4007841 592912
– Smart Remote EAN 4007841 009151
8� Operation/maintenance
Weather conditions may affect the way the motion detector works. Strong gusts
of wind, snow, rain or hail may cause the light to come ON when it is not wanted
because the sensor is unable to distinguish between sudden changes of tempera-
ture and sources of heat. The detector lens may be cleaned with a damp cloth if it
becomes dirty (do not use cleaning agents).
9� Declaration of Warranty
As purchaser, you are entitled to your statutory rights against the vendor. If these
rights exist in your country, they are neither curtailed nor restricted by our Warranty
Declaration. We guarantee that your STEINEL Professional sensor product will remain
in perfect condition and proper working order for a period of 5 years. We guarantee
that this product is free from material-, manufacturing- and design flaws. In addition,
we guarantee that all electronic components and cables function in the proper man-
ner and that all materials used and their surfaces are without defects.
Making Claims
If you wish to make a claim, please send your product complete and carriage paid
with the original receipt of purchase, which must show the date of purchase and
product designation, either to your retailer or contact us at STEINEL (UK) Limited,
25 Manasty Road, Axis Park, Orton Southgate, Peterborough, PE2 6UP, for a re-
turns number. For this reason, we recommend that you keep your receipt of purchase
in a safe place until the warranty period expires. STEINEL shall assume no liability for
the costs or risks involved in returning a product.
27