WMF 10 Manuel D'utilisation page 67

Initial setup
Depending on the quality of your tap water, you should insert the water filter from the scope of supply
Inserting the water
filter here (see "2.1 Supplied kit and optional accessories" on page 5).
The water filter ensures a genuine coffee taste. It filters out chlorine and other impurities from the water.
>
First rinse the water filter under water.
1
>
Insert the water filter (1) in the locating ring on the floor of the water tank without pressing it in.
Changeable display
As time goes on, the quality of the water filter deteriorates. With a daily average consumption of 8 cups
setting
of coffee, the water filter should be changed not later than after every 2 months (approx. 500 cups).
>
Set the changeable display (2) on the tank cover to the time of the next water filter replacement.
2
Water filters are available from the specialist dealers
Suction cap - fitting
Even if you do not use a water filter, the suction cap must be correctly assembled, otherwise the tank
cannot be completely emptied during drink preparation and the last cup is not filled completely.
4
>
Take the suction cap (3) and fix it firmly on the locating ring on the floor of the water tank.
>
When doing so, ensure that the arrow marking on the suction cap points towards the floating capsule
3 (4).
GB
8