WMF 10 Manuel D'utilisation page 100

Measures for problem rectification
No water flows
Cups are filled unequally
on the left and right.
Cup volumes are gradually
getting smaller.
No milk output,
although there is milk
in the container
41
Problem
Water tank empty?
> Fill the water tank with cold water.
Suction cap not mounted correctly?
> Check that the suction cap is firmly seated at the bottom of the water tank. Even
if you do not use a water filter, the suction cap must be installed firmly in place.
Small differences in the filled volumes can never be completely
avoided. After prolonged usage, the cup volumes get equalised.
Installation surface not horizontal?
> Place your coffee pad machine on a horizontal surface.
Always turn the locking knob as much as possible to the right.
> Regularly check that the central opening of the pad
cassette is clear to avoid blockage.
> Descale the coffee pad machine in good time.
> Check that the suction cap at the bottom of the water tank is firmly seated. Even
if you do not use a water filter, the suction cap must be installed firmly in place.
> Carry out a rinsing operation to remove air from below the suction cap.
Carry out a rinsing operation.
> Clean the steam nozzle.
Rectification measure