Braun Multiquick 7 MQ 777 Instructions page 14

• Insert the motor body into the coupling
(12b) until it locks.
• Plug in the appliance and insert the
pusher (12c) in the feed tube (12d).
• To operate the food processor, switch
on the appliance. During processing,
hold the motor body with one hand and
the food processor bowl with the other.
• When chopping is complete, unplug
and press the EasyClick release buttons
to detach the motor body.
• Press the lid interlock (12e) and hold it.
Turn the lid counter-clockwise to
unlatch it.
• Lift the lid up. Carefully take out the
blade before pouring out the contents
of the bowl. To remove the blade,
slightly turn it then pull it off.
Caution
• Do not use the food processor attach-
ment to chop extremely hard foods,
such as unshelled nuts, ice cubes, cof-
fee beans, grains or hard spices e.g.
nutmeg. Processing these foods could
damage the blades.
• Never place the food processor bowl in
the microwave oven.
Using the blade (12h), you may also mix
light batter like a pancake batter or a
cake mixture based on up to 250 g (2 cups)
of flour.
Recipe Example: Pancake Batter
1.5 cups / 375 ml milk
2 cups / 250 g plain flour
2 eggs
• Pour milk into the bowl, then add flour
and finally the eggs.
• Using full speed, mix the batter until
smooth.
Slicing / Shredding (F)
Use the slicing insert (12i-(i)) to slice raw
fruit and vegetables into fine, thin slices
e.g. cucumbers, onions, mushrooms,
apples, carrots, radishes, potatoes, zuc-
chini and cabbage.
14
5722112014_MQ 725-735-777 USCA_S6-36.indd 14 5722112014_MQ 725-735-777 USCA_S6-36.indd 14
Use the fine and coarse shredding inserts
(12j-(ii)) to shred foods such as apples,
carrots, potatoes, beetroot, cabbage,
cheese (soft to medium).
Refer to the Processing Guide F for maxi-
mum quantities, recommended times and
speeds.
Assembly and Operation
• For slicing / shredding place a insert
into the insert holder (12i) and snap into
position. Place the assembled insert
holder on the center pin of the bowl and
give it a turn so that it locks into place.
• Attach the lid to the bowl with the inter-
lock positioned to the right of the bowl
handle.
• To lock the lid, turn it clockwise so that
the interlock engages with a click.
• Insert the motor body into the coupling
until it locks.
• Plug in the appliance and insert the food
to be processed into the feed tube.
• Switch the appliance on to operate.
Never reach into the feed tube when
the appliance is switched on. Always
use the pusher to feed in food.
• After use, unplug and press the Easy-
Click release buttons to detach the
motor body.
• Press the lid interlock and hold it. Turn
the lid counter-clockwise to unlatch it.
• Lift the lid up. Take out the insert holder
before pouring out the contents of the
bowl.
Cutting French Fries (F)
Use the french fry disc (12j) to prepare
french fries.
Refer to the Processing Guide F for maxi-
mum quantities, recommended times and
speeds.
Assembly and Operation
• Place the french fry disc on the center
pin of the bowl and give it a turn so that
it locks into place.
21.12.15 09:15 21.12.15 09:15