Honeywell VE5000 Serie Mode D'emploi

APPLICATION
The VE5000 gas valves are for use with Honeywell V4055,
V4062 and V9055 fluid power actuators to regulate gas flow
to commercial and industrial burners. The valve design meets
current European approval requirements regarding flow
control and safety shut--off functions. They may be used with
natural and manufactured gases.
SPECIFICATIONS
Product range
The VE5000 class "A" safety shut--off valves series offers
several functionalities:
• Normally closed, non regulating ON/OFF
• Normally closed, HI--LO--OFF or modulating control.
Dimensions
See Figure 1. Installation drawing VE5000, page 2.
Pipe sizes
Inlet and outlet flange connections DN65, DN80 and DN100
according to PN16 ISO 7005--1
UNIVERSAL GAS VALVES
VE5000 Series
CLASS "A" SAFETY SHUT--OFF VALVE
Capacity
See Figure 2. Capacity curves on page 8.
Maximum operating pressure (mbar)
V4055A
Model
VE5065A 360
VE5080A 360
VE5100A --
VE5065C --
VE5080C --
VE5100C --
*
recommended Honeywell actuators
(supply voltage: 110 Vac or 220 Vac)
Maximum valve body rating
3 bar
Torsion and bending stress
Pipe connections meet group 2, according to EN161
requirements.
Ambient temperature range
--15 ... 60 °C
Valve body
Aluminium alloy die--cast
Strainer
AISI 303 steel
Closing spring
AISI 302 steel
Valve plunger
AISI 303 steel sliding on anti--friction bearing
Seals and gasket
Hydrocarbon resistant NBR rubber type
Standards and Approvals
The VE5000 Series gas valves conform with the following
EC directives:
• Gas Appliance Directive (90/396/EEC)
INSTRUCTION SHEET
*
Actuator type
V4055B V4062 V9055
-- --
-- --
360 --
-- 360 360
-- 360 360
-- 200 200
MU1R--9143 9612R0--NE
--
--
--