IKEA KVARTS Mode D'emploi page 7

Charger features
— Charge 1 to 4 pieces of HR6/AA and/or
1 to 4 pieces of HR03/AAA rechargeable
batteries.
— 4 charging channels.
— Charge is terminated by individual minus
delta or zero delta voltage sensors (-dV/dT
or 0dV/dT) .
— Safety by separate safety timer and
temperature sensor.
— Non-rechargeable and damaged batteries
detection.
— Charging status with LED indicator for each
channel.
Operating instructions
— Insert the batteries into the charging
slots correctly according to the polarity
indications (+/-) see pic 1.
— Connect the charger into the power outlet.
— The LED indicator status:
LED On: Charging in progress
LED Off: Charging complete
LED flashing: Error
— The LED indicator will flash if non-
rechargeable batteries or damaged batteries
are inserted into the charger by mistake.
Good to know
— Brand new batteries need 2 to 3 times of
charging and usage cycles to optimize the
battery performance.
— It is normal for batteries to become hot
during charging and they will gradually cool
down after charging.
7