Bradley 500 Serie Manuel D'installation page 14

Powder Coated & Stainless Steel Restroom Partitions, Floor-Braced — Series 500
5d Wall-Hung Pilasters (58") - Stirrup Brackets (Optional)
See Step 2 for instructions on mounting the stirrup brackets to a wall.
See Step 3 for instructions on mounting the stirrup brackets to a pilaster.
To establish level line, from the highest point in the room, measure 12" (305mm) from the floor. Use a level to transfer
this mark to the pilaster plumb line.
Pilasters at Wall
Slide the wall-hung pilaster into the stirrup brackets
A
and align with the established level line . Refer to the
submittal drawing and adjust to meet the specified
dimension .
Using the stirrup bracket as a template, drill Ø3/16"
B
holes through the pilaster at each bracket hole .
Secure the pilaster to the bracket using the
#14 x 5/8" screws provided .
Wall
12" (305mm)
14
Specified Dimension
(Standard Gap 1")
Pilaster
Plumb Line
Floor
3/22/2018
Pilasters at Pilasters
Slide the wall-hung pilaster into the stirrup brackets
A
and align with the established level line . Refer to the
submittal drawing and adjust to meet the specified
dimension .
Using the stirrup bracket as a template, drill Ø3/16"
B
holes through the pilaster at each bracket hole .
Secure the pilaster to the bracket using the
#14 x 5/8" screws provided .
Specified
Dimension
C L
Bradley • HDWT-INSTR-010 Rev F; ECN 17-14-007
Installation