Your New Radio; Monitor Function; Talking And Listening - Retevis RT45 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Display
1
2
3
4
5
1. Room Monitor
2. Battery Level Meter
3. Channel Indicator
4. Scan Indicator
5. Dual Watch Indicator
6. Volume Level Indicator
4
6
7
8
9
10
7. Sub-code Indicator
8. Keypad Lock Indicator
9. Transimit/Receive
Indicator
10. VOX Indicator

YOUR NEW RADIO

The two-way radios operate on PMR446 frequencies, and can
be used in any country where PMR446 frequencies are
authorized, subject to applicable regulations.
Turning Your Radio On And Off
To turn on the radio press and hold the POWER ON/OFF button
until a channel number appears and the radio Beeps . Press and
hold POWER ON/OFF button until the display goes blank to turn
off.

Monitor Function

It is good radio etiquette to monitor the channel for activity before
you transmit, to ensure that you do not interrupt other users already
on the channel. Press and hold "Mon" to check for channel activity.
If you hear static, the channel is clear for use.
The Battery Meter
The battery meter located in the display indicates how much
battery power you have remaining, to protect the rechargeable
battery, when battery power is low, the final bar in the Battery
Low icon will blink and an audible tone will sound twice before
the radio shuts off. Your batteries should be replaced or
recharged, if using rechargeable batteries.

TALKING AND LISTENING

Read this manual carefully before use.
Your radio has 8 channels. If you are in a group and you wish to
talk to each other, all radios must be set to the same channel
and interference eliminator code (CTCSS). If you experience
interference and need to change channel, ensure that you change
5

Publicité

Table des Matières
loading

Table des Matières