Eneo VMC-27LED Mode D'emploi page 33

● Advanced Menu
Advanced
Color Temp
Alarm
Energy Saving
3D NR
Anti Burn
Recall
Source
Panel scale
• Color Temp is used to control color temperature. (User, Normal, Warm, Cool)
• Alarm is input for the alarm level (Max 5Vdc) of sensor or any alarm device.
• Energy Saving change the Display Backlight. (OFF, Medium, Maximum) (27" only)
• 3D NR reduce the noise in the picture due to poor reception or poor picture quality.
(Off/Low/Middle/High)
• Anti Burn: This is to prevent the pixel burn on LCD after the use of display for a long time.
You can turn it on in normal mode or under scan mode.
– ON in normal mode: 55minutes (normal screen) –> 5minutes (under scan screen) –>
55minutes (normal screen). Automatically being iterating.
– ON in under scan mode: 55minutes (under scan screen) –> 5minutes (normal screen) –>
55minutes (under scan screen). Automatically being iterating.
• Recall the monitor original factory setting.
• Source selects between the CVBS (Composite INPUT), S-Video (Super Video INPUT),
RGB (PC INPUT), DVR, DVI or HDMI to be displayed.
• Panel Scale
Change the scale. (4:3, Full)
Note: When viewing a fixed screen for an extended period of time, Residual image or blurriness may appear.
>
>
< OFF >
MID >
< OFF >
>
< CVBS1 >
< Full >
When decreasing the backlight, the brightness of the black becomes darker without
any loss in video signal andthe power consumption is reduced.
13