Speaker Setup Guide; Safety Precautions When Setting Up; Home Theater Sound Setup; Standard Surround Setup - Pioneer HTS-LX 70 Mode D'emploi

01

Speaker Setup Guide

Chapter 1
Speaker Setup Guide

Safety precautions when setting up

When assembling the speakers, lay them down flat on
their side to avoid accidents or injury. Make sure to use a
stable surface when assembling, setting up, and placing
the speakers.

Home theater sound setup

Depending on the size and characteristics of your room,
you can place your speakers in one of two ways using this
system.

Standard surround setup

This is a standard multichannel surround sound speaker
setup for optimal 5.1 channel home theater sound.
Front/center (L)
Surround (L)
8
En
Front/center (R)
Receiver
subwoofer
Listening position Listening position
Surround (R)

Front surround setup

This setup is ideal when rear surround speaker
placement isn't possible or you want to avoid running
long speaker cables in your listening area. Use this setup
together with the Front Stage Surround Advance modes
in page 31.
Surround (L)
Front/center (L)
Listening position Listening position

Preparing the speakers

This unit comes with speaker bases that can be used to
adjust the speakers to the design of the room in which
they are placed.

Using the supplied speaker bases

1 Attach the non-skid pads to the speaker bases, as
shown below.
Use the adhesive side of the pads to attach them to the
base of each speaker base.
Non-skid pads x 16
Surround (R)
Front/center (R)
Receiver
subwoofer
Each speaker base