TRADINGZONE SMARTLINE STESI Instructions De Montage Et D'utilisation page 36

SOLUTION. POSSIBLE PROBLEMS
LIFT DESK. POSSIBLE PROBLEMS
Error Pt. Action 1
Check the power supply from the bottom tank to
the controller (disconnect power plug, check all
TABLE
1.1 power connections and cables, check the power
DOES NOT WORK
supply in the room, plug in power plug
(NO AUDIBLE CLICK
Click code must be audible from the controller)
CODE)
1.2 Replace controller
(Double + triple click code audible)
Disconnect power plug
2.1
Plug in/check motor cable
Plug in power plug
(Double + triple click code audible)
Disconnect power plug
Check that column is identical version (label on
2.2 cable ends and plug colour) if
different components are installed,
TABLE
install identical components
DOES NOT WORK
Connect power plug
(AUDIBLE CLICK CODE)
Read error message
2.3
(with Manual control PRO only)
Click code (double-click) is audible
however, fails to operate
Disconnect power plug
2.4 Disconnect manual control
Connect replacement manual control
Connect power plug
Reset the system
Result 1 Problem
Click code (double-click) is audible No power supply
Click code (double-click) is audible Controller was defective
Column was incorrectly
Click code (double-click) is audible
connected
Different components
Click code (double-click) is audible
combined
Error message: ................... acc. to error message
Manual controller defec-
Table works properly
tive
36
Action 2 Result 2
Table works
Reset the system
properly
Table works
Reset the system
properly
Table works
Reset the system
properly
Table works
Reset the system
properly
Failure to
operate