Corghi Erco 4004 Manuel D'utilisation page 46

EC DECLARATION OF CONFORMITY
WE:
CORGHI
S.p.
STRADA STATALE 468, 9
42015 CORREGGIO (RE) - ITALY
DECLARE UNDER OUR SOLE AND EXCLUSIVE RESPONSIBILITY THAT THE MACHINE:
VEHICLE LIFT
TYPE:
SERIAL No.:
TO WHICH THIS DECLARATION REFERS IS COMPLIANT WITH THE BASIC REQUISITES FOR HEALTH
AND SAFETY DEFINED BY ANNEXE I OF DIRECTIVE 2006/42/EC AND WITH THE FOLLOWING DIRECTI-
VES AND HARMONISED PRODUCT STANDARDS:
- DIRECTIVE 2006/42/EC (MACHINE SAFETY)
- DIRECTIVE 2004/108/EC (ELECTROMAGNETIC COMPATIBILITY)
- DIRECTIVE 2006/95/EC (LOW VOLTAGE)
- EN 1493:2010 – VEHICLE LIFTS – Fp OJ 08.04.2011.
THE FOLLOWING HARMONISED STANDARDS AND TECHNICAL SPECIFICATIONS HAVE BEEN APPLIED
TO VERIFY COMPLIANCE WITH THE FOLLOWING DIRECTIVES:
EN 349:1993+A1:2008, EN 842:1996+A1:2008, EN ISO 13849-1:2008, EN ISO 4413:2010, EN ISO 4414:2010,
EN ISO 3746:2010, EN 10025:1990, EN 10083-1:1995, EN ISO 12100-1:2003, EN ISO 12100-2:2003,
EN 55022:2006+A1:2007, EN 60204-1:2006, EN 60947-5-1:2003, EN 61000-6-1:2007, EN 61000-6-3:2007,
EN ISO 14121-1:2007;
Correggio,
The machine falls within the list of machines of annexe IV of directive 2006/42/EC. The machine has been constructed in
conformity with section 7, paragraph 2 of harmonised standard EN 1493:2010 and the constructor has implemented the
procedure described in section 12, paragraph 3, letter a) of the said standard, with internal verification of the manufactu-
ring process conducted as indicated in annexe VIII. The technical dossier relative to construction, drafted in accordance
with annexe VII – Part A, will be kept for 10 years from the date of issue of this declaration and will be rendered available
by Claudio Ing. Spiritelli, via Casette n. 3/B, Almisano di Lonigo (Vicenza), in response to requests originating from the
national authority responsible for the verification of compliance.
THE MANUFACTURER MAY PROVIDE THE USER INSTRUCTIONS IN DIGITAL FORMAT. IF YOU CANNOT VIEW THE FILE,
PLEASE REQUEST A PRINTED COPY
IN ACCORDANCE WITH DIRECTIVE 2006/42/EC
.
A
ERCO 4004
_____________________
(Date)
MODEL: ERCO 4004 B CT
______________________________
SIGNATURE OF CORGHI
REPRESENTATIVE
Claudio Ing. Spiritelli