Charging The Battery - Hilti SD 4500-A22 Mode D'emploi

Socket/bit drive
Screw length
Screw diameter
Operating temperature
Storage temperature range (without battery)
4.2 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Preparations at the workplace
CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.

5.1 Charging the battery

1. Before charging the battery, read the operating instructions for the
charger.
2. Make sure that the contacts on the battery and the contacts on the
charger are clean and dry.
3. Use an approved charger to charge the battery.
*2153708*
Printed: 15.07.2019 | Doc-Nr: PUB / 5295856 / 000 / 02
2153708
Hex socket / "
1
4
≤ 2.2 in
(≤ 55 mm)
≤ 0.17 in
(≤ 4.2 mm)
1 ℉ ... 140 ℉
(−17 ℃ ...
60 ℃)
−4 ℉ ... 158 ℉
(−20 ℃ ...
70 ℃)
21.6 V
1 ℉ ... 140 ℉
(−17 ℃ ...
60 ℃)
−4 ℉ ... 104 ℉
(−20 ℃ ...
40 ℃)
14 ℉ ... 113 ℉
(−10 ℃ ...
45 ℃)
English 9