KTM 63512938044 Manuel D'instructions page 21

–
Feed through the cable and stick reed switch
shown.
–
Mount and tighten tapping screws
Guideline
Screw, reed switch
Info
Route cable correctly and ensure that the cable bent or
500687-01
wedged.
–
Stick the counterpart of reed switch
as shown and mount and tighten tapping screws
Guideline
Screw, reed switch
500688-01
Final steps
–
Mount the seat (see Owner's Manual).
MOUNTING 5
3
in place as
4
(included).
1 Nm (0.7 lbf ft)
3
(included) to the seat
4
.
1 Nm (0.7 lbf ft)
9