DeLonghi La Specialista MAESRTO EC96XY Mode D'emploi page 24

PROBLEM
The appliance does not grind the co ee There is foreign matter that cannot be
If you want to change the type of co ee You must remove all the beans present
After grinding, the co ee lter is empty The co ee grinder co ee funnel is
After tamping, there is too much co ee
in the lter
CAUSE
ground in the co ee mill
The co ee beans container is not in the
right position
in the machine
clogged
23
SOLUTION
Clean the burrs as described in section "8.3
Cleaning the burr", making sure you remove
all the beans from the beans container (A1)
before extracting it.
Before putting the burr back, vacuum all resi-
dues from the housing ( g.14)
The container is correctly inserted when the
arrow ▲ is lined up with the
you hear a "click".
• Empty the beans container (if neces-
sary, operate the co ee mill without
beans or use a vacuum cleaner to re-
move any remaining beans)
• Attach the lter holder and operate the
co ee mill a number of times without
beans to free the grinder. Attach the
lter holder to the outlet of the grinder
(A18), lining it up with "INSERT", then
turning it to the right. Grinding begins
when the lter holder reaches the CLOSE
position and stops automatically. Re-
peat until the lter is empty
• Place the new co ee in the beans
container
• If the amount of co ee ground is not
enough to reach the perfect dose, pro-
ceed setting the appliance as for the
rst use
Clean as described in section "8.5 Cleaning the
"Smart tamping station"". If the problem per-
sists, access the guide by opening the hatch
and free it using the brush)
symbol and
...