DeLonghi La Specialista MAESRTO EC96XY Mode D'emploi page 25

PROBLEM
After grinding, the ground co ee in the
lter does not reach the "perfect dose"
CAUSE
The "Smart Tamping Station" needs
cleaning
The quantity of ground co ee needs
adjusting
Over time the burrs wear down
24
SOLUTION
Clean as described in section "8.5 Cleaning the
"Smart tamping station"", then grind again
Adjust the quantity of co ee with the dial
(B2). If the dial is already in the max. position,
select the second range of grinding adjust-
ment (see "6. Menù settings"- "Extra grinding
adjustment"). If the problem persists, replace
the burrs as described in section "8.4 Replac-
ing the burrs"
Replace the burrs as described in section "8.4
Replacing the burrs"