Specifications; Before Returning For Repairs - Schumacher Electric SCF-8020A Guide D'utilisation

PROBLEM
Charger will not turn on
when properly connected.
The battery is connected
and the charger is on, but
is not charging.
Battery clamps do not
spark when touched
together.

15. SPECIFICATIONS

Input Voltage ..............................................................................120V AC @ 60Hz, 4.8A
Output Voltage ..........................................................................................................12V
Output Current Rating ............................................................... 2A, 10<>20A @12V DC

16. BEFORE RETURNING FOR REPAIRS

If these solutions do not eliminate the problem, or for more information
about troubleshooting, contact customer service for assistance:
For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485. DO NOT SHIP
UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION (RMA) number
from Customer Service at Schumacher Electric Corporation.
All manuals and user guides at all-guides.com
POSSIBLE CAUSE
AC outlet is dead.
Poor electrical connection.
Clamps are not making a good
connection.
The charger is equipped with
an auto-start feature. It will not
supply current to the battery
clamps until a battery is properly
connected.
services@schumacherelectric.com
www.batterychargers.com
or call 1-800-621-5485
Monday-Friday 7:00
• 13 •
Check for open fuse or circuit
breaker supplying AC outlet.
Check power cord and extension
cord for a loose fitting plug.
Check for poor connection at
battery and frame. Make sure
connecting points are clean.
Rock clamps back and forth, for
a better connection.
No problem, this is a normal
condition.
to 5:00 CST
am pm
SOLUTION