Abicor Binzel ABIPLAS WELD CT Mode D'emploi page 24

English Translation of the original operating instructions
EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these Operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
1 Identification
1.1 EU Declaration of Conformity
1.2 Responsibilities of the User
2 Product Description
2.1 Designated Use
2.2 Use contrary to the designated use EN-4
2.3 Technical Data
2.4 Abbreviations
2.5 Nameplate
3 Safety Instructions
3.1 Classification
3.2 Emergency information
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional Description
5.1 Functional Description
6 Putting into operation
6.1 Equipping the torch body ABIPLAS
WELD CT 150 CT20
6.2 Equipping torch body ABIPLAS
WELD CT 250 CT20
6.3 Mounting Plasma segment holder EN-12
6.4 Mounting the torch body at the
complete fastener
6.5 Connecting the cable assembly EN-14
6.6 Mounting the machine side
connection
6.7 Mounting the wire conduit and
liner
6.8 Connecting the coolant
6.9 Setting the gas quantity
EN - 2
EN-3 7
EN-3
EN-3 8
EN-4 9
EN-4 9.1
9.2
EN-4
10
EN-6
EN-6
11
EN-6
EN-7 12
EN-7 12.1
12.2
EN-7 12.3
EN-8
EN-8
EN-8
EN-9
EN-9
®
EN-10
®
EN-11
EN-13
EN-14
EN-14
EN-15
EN-16
ABIPLAS
Operation
Putting out of operation
Maintenance and cleaning EN-18
Torch body
Cable assembly
Troubleshooting
Dismounting
Disposal
Materials
Consumables
Packaging
®
WELD CT
EN-16
EN-18
EN-19
EN-19
EN-20
EN-21
EN-22
EN-22
EN-22
EN-22