The housing, the lenses must be replaced if they are visibly damaged.
Caution
There are no user serviceable parts inside the unit. Do not open the housing or attempt
any repairs yourself. In the unlikely event your unit may require service, please contact
your nearest dealer.
Installation
The unit should be mounted via its metal hole on the bracket. Always ensure that the unit
is firmly fixed to avoid vibration and slipping while operating. Always ensure that the
structure to which you are attaching the unit is secure and is able to support a 10 times
weight of the unit.
2. Technical Specification
4/7/8/11/16/19 channels switchable
Automatically switching between music trig and auto mode
Great built-in programs under Master/Slave mode trigged by music
Individual control of each LED cluster
Sound sensitivity adjustable via the menu
Auto-fading show with 3 different speeds
Specially designed stand for floor operation
LCD display for easy addressing and setting
Power Supply: 230V 50Hz
Fuse: T 6.3A
Power consumption: 85W
LED: 1W x 80pcs (Red:20pcs, Green: 20pcs, Blue:20pcs, White/Amber:20pcs)
Dimension: 964 x 170 x 152 mm
Weight: 7.2kgs
20-
3. How To Set The Unit
3.1 Control Panel
Display
To show the various menus and the selected functions
LED
DMX
On
MASTER
On
SLAVE
On
SOUND
Flashing
Button
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
Microphone
Receive the sound to control the unit
Only for remote control
By connect to the 1/4'' microphone jack to control the unit for Stand by, Function and Mode
function.
Mains input
Connect to supply mains power.
Mains output
Connect to supply mains power for other units.
Fuse
For over current protection.
DMX input/output
For DMX512 link, use 3/5-pin XLR plug cable to link the unit together.
Safety Ring
DMX input present
Master Mode
Slave Mode
Sound activation
21-