Bosch PROMAX MiniMax-E Mode D'emploi page 6

OPERATING YOUR PROMAX
MiniMax-E;RG 5410A-E, RG 3000-E,RG
It MUST be ensured prior to use that the operating environment is FREE of hazardous
concentrations of gases/vapors/dusts and/or fibers
Get yourself familiar with the operation of the front panel of your
Promax Recovery Unit.
You will find these instructions in the original manual which is
supplied with the product.
You can find these instructions in section:
BEFORE connecting your unit to a system containing a Class A2L
refrigerant it must be ensured that the recovery unit is empty of ANY
refrigerant. ONLY an empty unit should be connected. Make certain
that 0 or negative pressure is shown on both blue and red gauges
Bosch Automotive Service Solutions GmbH declines all responsibilities or claims
when Promax units are used improperly or not according all recommended/mentioned guidelines.
III OPERATIONAL PROCEDURES
before proceeding with use!!.
6-E
- 6 -