Bosch PROMAX MiniMax-E Mode D'emploi page 3

For use with A2L Refrigerants
Subject: Promax Refrigerant Recovery Units
Dear Customer,
We herewith inform you, that:
The Promax Refrigerant Recovery Units, truly universal machines capable of recovering
CFC, HCFC, HFC and class A2L refrigerants.
On top of the legendary Promax build quality; it features a proven compressor for the
fastest refrigerant recovery and it is possible to safely recover class A2L refrigerants
such as R32 and R1234yf when operated by properly trained personnel in accordance
with acknowledged safety practices and below Notes are respected.
PLEASE NOTE:
That if used for recovery of Class A2L refrigerants such as R32, 1234yf, 1234ze or
R143a, the unit must ONLY be operated by authorized personnel with proper and
specific training in the use and handling of these refrigerants.
NOT
The unit is for use in hazardous/explosive environments.
MUST FREE
It be ensured prior to use that the operating environment is of
hazardous concentrations of gases/vapors/dusts and/or fibers.
USE
The of an appropriate combustible gas leak detector (e.g. TIF 8900) or
mandatory
measuring device to ensure the safety of the working environment is
before operating the Promax Refrigerant Recovery units.
The USER must follow this additional Promax A2L manual instructions which are
available through your supplier or can be obtained upon request.
If not: do not use this equipment in combination with A2L
refrigerants.
Bosch Automotive Service Solutions GmbH declines all responsibilities or claims
when Promax units are used improperly or not according all recommended/mentioned guidelines.
- 3 -