Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN – Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
1. Chuck
2. Locking Sleeve
3. Cap of grease reservoir
4. On/Off trigger switch
5. Handle
6. Power cord
7. Speed adjustment knob
8. Stop Impact (selector for hammer drilling /
normal drilling)
9. Stop Rotation (selector hammer drilling /
hammer)
10. Additional handle
11. Depth gauge stop
II. CHARACTERISTICS
Description
Reference
Model / Type
Power source
Power
Protection Class
No load speed n
o
Impact rate
Impact Energy
Chuck
Drilling capacity : Concrete / Metal / Wood
Sound pressure level (L
Sound power level (L
Vibrations level
(Uncertainty K=1.5 m/s
Net weight (approx.)
III. Safety instructions
IV. Getting Started
)
PA
)
WA
2
)
V. Operation
VI. Maintenance and Storage
Fig.1
Electric Hammer Drill
PRKIT10PF/2 / 531039
Z1C-DS-32K/T
230-240V ~ 50Hz
1500W
II
-1
0-880 min
-1
0-4350min
5.5J
13 mm
Ø 32mm / 13mm / 42mm
Measured 90.7dB(A) (K=3dB(A))
Measured 101.7 dB(A) (K=3dB(A))
Hammer Drill work mode : 15.816 m/s
Chiselling work mode
4.9 Kg
2
2
: 13.645 m/s
Page 15 / 36
Publicité
Table des Matières
