Skandika Fitness PEGASOS Instructions De Montage Et Mode D'emploi page 34

COMPUTER | USE
This computer has an automatic on/off function so that it switches on when the pedals move or when
any button is pressed, and turns into stand-by mode automatically if no signal has been received for
approx. 4 minutes. The computer gets its power supply by the included adaptor. The adaptor will be
connected to a normal mains plug (European standard, please check the specifications resp. please
use a fitting mains adaptor for your power system.
Manual Mode (fig. 2)
In manual mode you can adjust the load manually.
After selecting „Manual" (confirm with „MODE"-button) you are in manual mode. Start exercise by
pressing "START/STOP". You may change the tension level at any time during exercise with "UP"
and "DOWN". You may also input target values for the following function values:
a. TIME / b. DISTANCE / c. CALORIE / d. PULSE
To input a target value, do not press "START/STOP" after selecting mode, but instead use "UP",
"DOWN" and "MODE" to input the target values. After your input, press "START/STOP". To pause
exercise, press the „ START/STOP"-button at any time. If you press the Reset-button (only possible
during pause mode), you may return to main menu.
34
Fig.1:
Full display after switching on
Fig.2:
Manual Mode