Skandika Fitness PEGASOS Instructions De Montage Et Mode D'emploi page 28

ASSEMBLY INSTRUCTIONS
Step 3
1. Insert front post (D) into main frame (F) through the decorative cover (F-17). Remove pre-assem-
bled screws (F-20), flat washers (F-21), C-washers (F-22) and spring washers (F-23).
2. Connect upper sensor cable (D-2) and lower sensor cable (F-19).
3. Fix front post (D) on main frame (F) with screws (F-20), flat washers (F-21), C-washers (F-22)
and spring washers (F-23). Slide down the decorative cover (F-17).
28