Step 4
1. Loosen the pre-assembled screws (D-4) on the front post (D).
2. Guide the shaft (D-7) through the flat washer (O-10).
3. Assemble the two lower handlebars (E) with flat washers (O-9) and hex bolts (O-8) on each side.
Fix the screws (D-4) tightly.
4. Fix the pedal tubes (I-1) and lower handlebars (E) on each side with screws (O-5) and flat
washers (O-6).
Note: Please use two allen keys to fix hex bolts (O-8) on both sides at the same time.
ASSEMBLY INSTRUCTIONS
29