Skandika Fitness PEGASOS Instructions De Montage Et Mode D'emploi page 31

Step 7
1. Remove the pre-assembled screws (E-3) on
the lower handlebars (E).
2. Assemble the front & rear covers (E-4 & E-5)
with screws (E-3).
3. Remove the pre-assembled screws (D-5) on
the front post (D), then assemble the bottle
holder (D-6) with the screws (D-5).
ASSEMBLY INSTRUCTIONS
Step 8
1. Guide the hand-pulse wire (B-5) through the
2. Mount the front handlebars (B) to handlebar
hole of front post (D).
post (D) with curved washers (O-4) & screws
(O-5).
31