STOK Tower SCC0140 Manuel D'utilisation page 10

STEP 2: ASSEMBLING PANELS TO THE
SUPPORTS
See Figures 6 - 7.
To attach the side panel labeled "L":
 Hook the 3 tabs of the side panel labeled "L" into the
slots on the front support.
 Make sure the panel is oriented as shown below.
NOTE: The front support is located above the firebox
handle screw holes.
FRONT
SUPPORT
SLOTS
FRONT
SUPPORT
Fig. 6
REAR
SUPPORT
TABS
PANEL (L)
FRONT
FIREBOX HANDLE
OF FIREBOX
SCREW HOLES
ASSEMBLY
 Place the side panel labeled "L" around the rear support.
The screw holes in the left side panel should align with
the screw holes on the outside of the support.
 Using screws (DD), attach the side panel to the rear
support.
NOTE: Insert and tighten the center screw first. Repeat
with the top and bottom screws. Tighten securely.
 Repeat the instructions above to attach the panel labeled
"R".
SIDE
SIDE
PANEL (R)
SCREW
HOLES
SCREWS (DD)
Fig. 7
10
REAR
SUPPORTS
FRONT OF
FRONT
FIREBOX
SUPPORT
TABS MUST
FACE UP
SIDE
PANEL (L)