Cutout Dimensions - Rockwell Automation Allen-Bradley PanelView 300 Instructions D'installation

Cutout Dimensions

Use the full size template shipped with the PV300 Micro to mark the cutout
dimensions. The figure below shows a reduced scale cutout. A full scale template
is also available inside the back cover of this document.
4.42 in. (112 mm)
4.0 in. (102 mm)
Clearances
Allow 51 mm (2.0 inches) of space on all sides of the terminal for adequate
ventilation and maintenance.
2.12 in.
(54 mm)
2.0 in. (51 mm)
2.0 in. (51 mm)
PanelView 300 Micro Terminal
0.178 in. (4.5 mm)
Diameter
3.62 in.
(92 mm)
7
41061-156-01(A)