Accessories - Rockwell Automation Allen-Bradley PanelView 300 Instructions D'installation

22 PanelView 300 Micro Terminal
Maintenance
The PanelView 300 Micro has no internal components that are user accessible.
The rear cover is not removable, therefore, you should not remove it for
troubleshooting or maintenance. The real-time clock battery and the LCD display
backlight are not replaceable.
To clean the display window of the PanelView 300 Micro:
1. Disconnect power from the terminal at the power source.
2. Use a clean sponge or soft cloth to clean with a mild soap or detergent to clean
the display. Do not scrub, use brushes, abrasive cleaners or solvents.
3. Dry the display with a chamois or moist cellulose sponge to avoid water spots.

Accessories

The following accessories are available for the PanelView 300 Micro.
PanelBuilder32 Software
Catalog No. Description
2711-ND3 PanelBuilder32 Software for developing applications
for the line of Standard PanelView terminals.
DC Power Input Terminal Block
Catalog No. Description
2711-TBDC Removable (3-position screw) DC Power Input Terminal Block
Communication Cables
Cable
1761-CBL-AM00, Series C
1761-CBL-AP00, Series C
1761-CBL-PM02, Series C
1761-CBL-HM02, Series C
2711-CBL-PM05, Series C
2711-CBL-HM05, Series C
2711-CBL-PM10, Series C
2711-CBL-HM10, Series C
41061-156-01(A)
Connector Type
8-pin mini-DIN to 8-pin mini-DIN
8-pin mini-DIN to 9-pin D-Shell
8-pin mini-DIN to 9-pin D-Shell
8-pin mini-DIN to 8-pin mini-DIN
8-pin mini-DIN to 9-pin D-Shell
8-pin mini-DIN to 8-pin mini-DIN
8-pin mini-DIN to 9-pin D-Shell
8-pin mini-DIN to 8-pin mini-DIN
Version
3.60 or later
Quantity
10
Cable Length
0.5 meter (1.5 ft)
0.5 meter (1.5 ft)
2 meter (6.5 ft)
2 meter (6.5 ft)
5 meter (15 ft)
5 meter (15 ft)
10 meter (30 ft)
10 meter (30 ft)