Fein Slugger JME Holemaker III Mode D'emploi page 21

OBJ_BUCH-0000000281-002.book Page 21 Tuesday, April 24, 2018 9:09 AM
Starting and stopping the drill motor
(figure 12).
Starting:
Switch the motor switch ON.
Stopping:
Switch the motor switch OFF.
Shutting magnet OFF:
Switch off the magnet with the magnet power
switch.
When the power supply is disconnected
while the motor is running, a protective cir-
cuit prevents automatic restarting of the
motor. Restart the motor again.
The core drill units do not have overload pro-
tection. In case of improper use, the motor
can become damaged.
Fig. 12
en
21
Switching the
drill motor on
Switching the
drill motor off