Siemens VSZ41466 Notice D'utilisation page 14

en
Changing the dust bag
Seal the dust bag by pulling the sealing strip
and then remove it.
Insert the new dust bag into the holder as far as
the stop. As you do this, leave it folded up, as it
is when removed from its packaging.
Unfold the dust bag in the dust bag
compartment as far as possible.
When closing the dust bag compartment lid,
make sure that the dust bag is not trapped.
Caution: the dust bag compartment lid will
only close when the dust bag or textile dust
bag is inserted.
If the dust bag change indicator is still lit after
the dust bag has been changed, please check
whether the nozzle, tube or flexible hose are
blocked.
16