MetalTech CLIMB-N-GO I-CNG Instructions De Montage Et Consignes De Sécurité page 6

INSTALLATION
1. Unscrew and open the front part of the Climb-N-Go case.
2. Choose the battery receiver that matches the brand of battery you are going to
use with the Climb-N-Go. The three receivers are identified with the name of the
battery brands.
3. Unscrew the receiver and install it on the top of the box. Fix the receiver into place
using the same screw.
4. Close and screw the front part of the case.
5. Slide your battery into the receiver as indicated by the manufacturer.
1
4
6
2
5
3