MetalTech CLIMB-N-GO I-CNG Instructions De Montage Et Consignes De Sécurité page 4

OPERATIONAL GUIDE
HOW TO USE THE DRIVE WHEELS
ACTIVE LOCK
FREE MODE
4
ACTIVE LOCK:
To use the features of the Climb-N-Go,
lock the drive wheels by positioning the
locking levers of both wheels in "Active
lock" mode, this allows the automatic
locking system of the wheels to be
activated when using the Climb-N-Go.
FREE MODE:
You can unlock the drive wheels of the
Climb-N-Go by positioning the locking
levers on both wheels in "Free Mode", to
move the scaffolding in a conventional
manner. Note: Never climb up into the
scaffolding if the Climb-N-Go wheels are
in "Free Mode", unless the scaffolding
casters are locked.