HIKOKI DB 3DL2 Mode D'emploi page 12

English
5. Storage
Store the driver drill In a place in which the temperature
is less than 40 C and out of reach of children.
6. Service parts 11st
°
CAUTION
Repair, modification and inspection of
Tools must be carried out by a
Service Center.
This Parts List will be helpful if presented with the
tool to the Authorized Service Center when
requesting repair or other maintenance.
HiKOKI
In the operation and maintenance of power tools, the
safety regulations and standards prescribed in each
country must be observed.
MODIFICATIONS
Power Tools are constantly being Improved
and modified to incorporate the latest technological
HiKOKI
advancements.
Accordingly, some parts may be changed without prior
notice.
Important notice on the batteries fo
cordless power tools
Please always use one of our designated genuine
batteries. We cannot guarantee the safety and
pe formance of our cordless power tool when used
with batteries other than these designated by us, or
when the battery is disassembled and modified (such
「
as disassembly and replacement of cells or other
internal parts)
GUARANTEE
We guarantee Power Tools In accordance with
statutory/country specific
HiKOKI
not cover defects or damage due to misuse, abuse, o
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling
instruction, to a Authorized Service Center.
NOTE HiKOKI
Due to continuing program of research and
development, the specifications herein are subject to
HiKOKI's
change without prior notice.
Information concerning airborne noise and vib
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 68 dB (A)
Measu「ed A-weighted sound pressure level: 57 dB (A)
Uncertainty KpA: 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Screwdriving without impact:
Vibration emission value 8h = 0.9 m/s
Uncertainty K = 1.5 m/s
2
12
Authorized
HiKOKI
HiKOKI
the
HiKOKI
『
egulation. This guarantee does
「
2
The declared vibration total value has been measured in
accordance with a standard test method and may be used
for comparing one tool with another.
It may also be used in a preliminary assessment of
exposure.
Power WARNING
O The vibration emission during actual use of the power
tool can differ from the declared total value depending
on the ways in which the tool is used.
O To identify safety measures to protect the operator
that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
「
ation
『