Installation - Bradley S19294HB Manuel D'installation

S19294HB, S19294HBT

Installation

B
C
With the cabinet door open, connect the water supply.
Tailpiece: Connect the non-flanged end of the
tailpiece to the drain pipe.
P-trap: Connect the top of the P-trap to the drain
pipe. Adjust for side or rear drain according to your
application.
Connect the 1¼" waste line (supplied by installer) to
the bottom of the tailpiece or P-trap.
4
Mount the unit in the wall opening
with four bolts (supplied by installer).
3/27/2013
A
Rough in the wall opening and
the ½" NPT water supply.
14½"
(368mm)
D
To
Wall
Slowly open the water supply lines
E to relieve air and pressurize the
valve. Test the unit for leaks and
adequate flow.
Bradley • 215-1743 Rev. B; ECN 13-05-014
Installation
32¼"
(819mm)