Control Panel - Power Fist 8603052 Manuel D'utilisateur

V4.1
audio perception by bringing the sound directly to your ears while masking
outside noise interference. You will be amazed at how much better you can hear
the detector signals through headphones than you can with the speaker alone.
Using headphones with the detector also uses less battery power.
To connect headphones to the detector, insert the headphone's 1/8
in. plug into the headphone jack.
IMPORTANT! The detector's internal speaker will be
disconnected when you connect a headphone.
OPERATION

CONTROL PANEL

1 Mode
2 Set
3 Action Up
4 Target (P/P)
5 LCD
Visit www.princessauto.com for more information
Metal Detector
6 Photosensitive Device
7 Enter
8 Power
9 Action Down
10 Headphone Jack
8603052
9